Custom Components
Vanaheim Technologies Ltd
CNC MachiningP.O. Box 202 155 Custom Components
CNC MachiningSouthgate Centre CNC Machiningphone - 021 507 857
CNC MachiningTakanini 2246 CNC Machiningemail  - gerrit@vanaheim.co.nz
CNC MachiningAuckland
CNC Machining
Vanaheim Technologies LtdAbout Us
Vanaheim Technologies LtdCNC Machining
Vanaheim Technologies LtdComponent Design Services
Vanaheim Technologies LtdCustom Components
Vanaheim Technologies LtdCarbon Fibre Spar Repairs
Vanaheim Technologies LtdBoatSpeedWax
Vanaheim Technologies LtdHalyard Locks
Vanaheim Technologies LtdRope Code Paint
Vanaheim Technologies LtdYacht & Boat Repairs
Vanaheim Technologies LtdTerms Of Trade -- Warranty
Vanaheim Technologies LtdFinn Shop
Vanaheim Technologies LtdFinn Sailing News
Productivity Software

Terms Of Trade -- Warranty

Software Developers
Terms Of Trade

Any purchases over NZ$1,000 require a 25% deposit.
Any purchases over NZ$5,000 require a 50% deposit.

Final payment is on a "full payment prior to delivery" basis. Either by cash, cheque or direct bank credit.

All company orders require a signed Purchase Order.
Payment for company orders will be due on the 20th of the month following delivery.
Ownership of all goods remains with Vanaheim Technologies Ltd until they are paid for in full.

Warranty

All goods and or services provided are warranted against defects and or faulty workmanship for 30 days from delivery, provided they are used in accordance to their designed end use application and all reasonable operating practises are followed.

If goods are sold to a third party any warranty pertaining to those goods is voided. 

As Vanaheim Technologies Ltd has no control over the end use application of any of the goods and or services, buyers and users therefore must make their own assessment that the conditions and end use application of the goods and or services offered meets their requirements.

NO RESPONSIBILTY IS ACCEPTED, EXCEPT THOSE NON EXCLUDEABLE CONDITIONS OF NEW ZEALAND LAW.

Vanaheim Technologies Ltd responsibility is limited, at its discretion, to the replacement of any goods and or service. Alternatively to refund the original purchase cost when the goods are returned for credit.
Yacht & Boat Repairs
Web Site Development
All our services are project orientated -- we discuss what objectives needs to be achieved and create any number of specific projects, with mutually agreed outcomes and time frames, to complete the objective.

Having a number of short and sharp projects enables proper budgeting and process phasing.

You maintain control at all times.
CNC Machining
Custom Fabrication
Browse our web site -- we can be of service to you or your business in so many ways.
Custom Component Manufacturers
Custom Componenet Manufacturers
CNC MachiningTop of Page
CNC Machining
Custom Components
Web Site -- Copyrighted To Vanaheim Technologies Ltd @ 2010

Web Designer -- Gerrit Bearda  gerrit@vanaheim.co.nz